To run the overburning test as a simulation, proceed as follows:
- 1.
- If there are several optical drives available, select the one you want in the drop-down menu.
- 2.
- Insert a blank disc in the optical drive.
- 3.
- Click Extra > Overburning Test.
- à
- The Nero DiscSpeed – Overburning Test window opens.
- 4.
- If you want to simulate the burn process in RAW mode, enable the RAW mode check box.
- 5.
- Choose the volume of data that you want to write to the disc or let Nero DiscSpeed determine the official capacity.
- 6.
- Click the Start button.
- à
- The simulation is started. You can follow the progress of the burn process in the Write position and Disc information areas, as well as in the display area underneath. You can cancel a running test at any time by clicking the Stop button.
- à
- A dialog box specifying the maximum detected capacity opens.
- 7.
- If you want to add the detected value to the internal overburning database, click the Yes button.
- à
- If a disc of the same type is inserted again, Nero DiscSpeed will detect it in this way, and the results stored in the database can be displayed in the display area.
- 8.
- If you want to discard the detected value, click the No button.
- è
- You have run the overburning test.
| RAW mode |